Προβολή 1–12 από 33 αποτελέσματα

Show sidebar
Close

7 ” SO-239 Turbo Magnetic Mount Rubber Boot for CB & HAM Radio

22.00
A high quality 7″ magnetic mount complete with full size magnet, rubber base, SO239 fitting, 5m of cable with PL259 plug fitted. Ideal for most amateur radio and Sirio type large CB antennas   Specification: Diameter 180mm Fitting SO-239 Moulded Lead PL-259 Plug Rubber boot
Close

7 ” Turbo Magnetic Mount 38 Fitting Rubber Boot for CB & HAM Radio

22.00
A high quality 7″ Turbo magnetic mount complete with full size magnet, rubber boot, standard 3/8 fitting, 5 meters  of cable with PL259 plug.   Specification: Diameter 180mm Fitting 3/8 UNF Moulded Lead PL-259 Plug Rubber boot
Close

ALAN S9 PLUS

40.00
AYTOKINHTOY, 25-30MHz, 200CH., 300W, 4dB, 150cm, ΒΑΣΗ ΠΕΤΑΛΟΥΔΑ 120º, 4m ΚΑΛΩΔΙΟ RG-58 & ΚΟΝΕΚΤΟΡΑ PL - 259R.
Close

Mini Springer Stinger CB Antenna + 3/8 Power Stick Body mount Kit CB Aerial

30.00
Body Mount Kit  Black Mini Springer/Stinger Technical Specifications Base Loaded mobile antenna Power handling 1000 watts Length 0.90 m Coil length 130 mm Coil diameter 45 mm Impedance 50 Ohms Frequency 26-28 MHz SWR 1:1.5 Fitting 3/8 unf Whip 17.7 ph Stainless Steel
Close

Mini Springer Stinger CB Antenna+Large Washer Body Mounting Kit CB Radio Aerial

30.00
Large WasherBody Mount Kit  Black Mini Springer/Stinger   Large Washer Mounting Kit Specification:
  • Fitting 3/8 UNF
  • Cable 4 meters RG58
  • Connector PL-259
Mini Springer/Stinger Technical Specifications Base Loaded mobile antenna Power handling 1000 watts Length 0.90 m Coil length 130 mm Coil diameter 45 mm Impedance 50 Ohms Frequency 26-28 MHz SWR 1:1.5 Fitting 3/8 unf Whip 17.7 ph Stainless Steel
Close

Mini Springer Tornado Stinger CB Antenna + 6″ Magneric Mount Kit CB Aerial

32.00
CB Large 6” Magnetic Mount with Black Mini Stinger Technical Specifications Base Loaded mobile antenna Power handling 1000 watts Length 0.90 m Coil length 130 mm Coil diameter 45 mm Impedance 50 Ohms Frequency 26-28 MHz SWR 1:1.5 Fitting 3/8 unf Whip 17.7 ph Stainless Steel
Close

Mini Springer Tornado Stinger CB Antenna + Gutter Mount Kit CB Aerial

32.00
CB Tall Gutter Mount Kit with Black Mini Stinger Black Gutter mount complete with 3/8 snail mount and approx 4 meters of RG58 Cable with a PL259 UHF Plug fitted Technical Specifications Base Loaded mobile antenna Power handling 1000 watts Length 0.90 m Coil length 130 mm Coil diameter 45 mm Impedance 50 Ohms Frequency 26-28 MHz SWR 1:1.5 Fitting 3/8 unf Whip 17.7 ph Stainless Steel
Close

Pigmy Small 90 MM Magnetic Mount 3/8 Fitting Rubber Boot for CB & HAM50

16.00
A small 3/8 thread mag mount, approx 90 mm  diameter, with replaceable rubber boot to help prevent scratching.   The coax is moulded into the 3/8 mount, which sits on top of the mag base. It comes complete with approx 5 Metres  of coax and a fitted PL259 plug.   Suitable for any small  antennas up to about 0.90 cm  in length.   Specification: Diameter 90 mm Fitting 3/8 UNF Moulded Lead PL-259 Plug Rubber boot
Close

Sigma 3/8 ‘N’ Type DV CB HAM Antenna Aerial Body wing Mount Cable Kit

16.00
SIGMA 3/8 DV Base Mounting Kit. High Quality construction, designed to be fitted through a 13mm hole of a vehicle roof and comes complete with a large weatherproof rubber seal. The cable is attached via a right angle ‘N’ Type connector. The SIGMA 3/8 DV Base Mounting Kit is designed for use with 3/8 UNF Antennas. Specification:  
  • Fitting 3/8 UNF
  • Cable 4 meters RG58
  • Connector PL-259
Close

Sigma 3/8 Gutter mount CB radio Aerial Antenna For Land Rover Tractor or 4X4 Use

16.00
The SIGMA Gutter Mount is designed to be fitted to any vehicle with any roof gutter. Due to it’s High Quality Cast Iron construction, the SIGMA Gutter Mount is very popular with Off Roaders, Landrover Discovery drivers and 4×4 enthusiasts. Specification:
  • Fitting 3/8 UNF
  • Cable 4 meters RG58
  • Connector PL-259
Close

Sigma 3/8 Ham CB Antenna Aerial Fold-Over Swivel Adaptor

8.00
The Sigma Euro-Comm  swivel and ‘Fold Over’ adaptor for all 3/8 thread mounted CB and Ham Antenna Aerials.   It enables you to fold your antenna back on it’s mount without removing it ,and adjust the angle in both horizontal and clockwise direction using the 6mm allen bolt and lock nut.   Ideal for parking vehicles in garages and whilst travelling under low trees & bushes, also if your antenna mount is on the back or side of your vehicle etc..
Close

SIGMA 3/8 Large Washer Body Mounting Kit CB Radio Aerial Antenna

16.00
High Quality construction, designed to be fitted through a small hole of a vehicle roof and comes complete with a weatherproof rubber seal. The SIGMA 3/8 Large Washer Body Mount is designed for 3/8 UNF Antennas. Specification:
  • Fitting 3/8 UNF
  • Cable 4 meters RG58
  • Connector PL-259